Journal Articles
"Acrylic Triblock Copolymers for Ceramic Processing Applications: Rheological and Green Body Properties," M.E. Seitz, K.R. Shull, and K.T. Faber, submitted to the Jounral of the American Ceramic Society.
“Load Partitioning in Silicon Carbide Aluminum Alloy 3-1 Composites,” T.E. Wilkes, B.J. Harder, J.D. Almer, and K.T. Faber, submitted to Acta Materialia.
"Ceramic Laminates by Gelcasting," N.O. Shanti, D.B. Hovis, M.E. Seitz, J.K. Montgomery, D.M. Baskin, and K.T. Faber, International Journal of Applied Ceramic Technology, 6[5] 593-606 (2009). DOI:10.1111/j.1744-7402.2008.02312.x
“X-ray micro-computed tomography of beech wood and biomorphic C, SiC, and Al/SiC composites,” T.E. Wilkes, S.R. Stock, F. De Carlo, and K.T. Faber, Philosophical Magazine, 89[17] 1373-1389, (2009). DOI:10.1080/14786430902956457
"Residual Stress Analysis of Multilayer Environmental Barrier Coatings," B.J. Harder, J. Almer, C.M. Weyant, K.N. Lee and K.T. Faber, Journal of the American Ceramic Society, 92[2], 452-459, (2009). DOI:10.1111/j.1551-2916.2008.02888.x
“Elasticity and Inelasticity of the SiC/Al-13Si-9Mg Biomorphic Metal Ceramics,” B.K. Kardashev, T.S. Orlova, B.I. Smirnov, T.E. Wilkes, and K.T. Faber, Physics of the Solid State, 50[10] 1882-1887, (2008). DOI:10.1134/S1063783408100168
"High-Energy X-Ray Measurements of Layered Systems for Energy Applications" J.D Almer, D.J. Liu, B.J. Harder, C.M. Weyant, Proceedings of the 29th Risoe Symposium on Materials Science: Energy Material, 2008, p 207-214.
"Self-Assembly and Stress Relaxation in Acrylic Triblock Copolymer Gels" M.E. Seitz, W.R. Burghardt, K.T. Faber, and K.R Shull, Macromolecules, 40[4], 1218 (2007). DOI:10.1021/ma061993+
“Processing, Microstructure and Mechanical Behavior of SiC-Based Ceramics via Naturally Derived Scaffolds,” A.R. de Arellano López, J. Martínez Fernández, F.M. Varel Feria, R.E. Sepúlveda, M.J. López Robeledo, J. Llorca, J.Y. Pastor, M. Presas, K.T. Faber, V.S.Kaul, K.E. Pappacena, and T.E. Wilkes, to appear in Proceedings of 30th International Conference on Advanced Ceramics and Composites. refereed conference proceeding
"A Chinese stone kneeling figure in the Art Institute of Chicago: new evidence from archaeological finds and scientific investigations," F. Casadio, J.Xu, E. Pearlstein, K. T. Faber A. Knowles, Jing Zhichung, to appear in Studies of the Sculptural Arts of Asia using Scientific Methods, J. Douglas, Ed., Archetype Press.
"Precursor Selection and its Role in the Mechanical Properties of Porous SiC Derived from Wood," V. S. Kaul, K. T. Faber, R. Sepulveda Ferrer, A. R. de Arellano López, J. Martínez-Fernández, Materials Science and Engineering A, in press 2006
"Residual Stress and Microstructural Evolution in Environmental Barrier Coatings of Tantalum Oxide Alloyed with Aluminum Oxide and Lanthanum Oxide" C.M. Weyant, K.T. Faber, J.D. Almer, J.V. Guiheen, J. Am. Ceram. Soc., 89 [3] 971-978 (2006).
“Synthetic Crossed-Lamellar Microstructures in Oxide Ceramics,” V.S. Kaul and K.T. Faber, Journal of Ceramic Processing Research 6 [3] 218-222 (2005).
"Residual Stress and Microstructural Evolution in Tantalum Oxide Coatings on Silicon Nitride" C.M. Weyant, K.T. Faber, J.D. Almer, J.V. Guiheen, J. Am. Ceram. Soc. 88 [8] 2169-2176 (2005).
“Processing and Surface Flaw Tolerance of Alumina Bilayers,” J. K. Montgomery and K. T. Faber, Journal of the American Ceramic Society 88 (2): 287-292 (2005).
“Tantalum Oxide Coatings for Candidate Environmental Barriers,” M, Moldovan, C.M. Weyant, D.L. Johnson, and K.T. Faber, J. Thermal Spray Tech. 13 [1] 51-56 (2004).
“Thermal Conductivity, Phase Stability and Oxidation Resistance of Y3Al5O12 (YAG/Y2O3-ZrO2 YSZ) Thermal Barrier Coatings,” Y.J. Su, R.W. Trice, K.T. Faber, H. Wang and W.D. Porter, Oxidation of Metals. 61 (3-4) 253-271 (2004).
“Materials Education: Opportunities Over a Lifetime. A Report on the 17th Biannual Conference of National Materials Policy,” I.E. Anderson, L.H. Schwartz, K.T. Faber, G. Slade Cargill and B. Houston, J. Mater. Ed. 24 [1-3] 1-17 (2003). non-refereed conference proceeding
“A Thermoreversible Gelcasting Technique for Ceramic Laminates,” J. K. Montgomery, A. S. Botha, P. L. Drzal, K. R. Shull and K. T. Faber, Scripta Materialia, 40 785-89 (2003).
“The Thermal Properties of Pitch-Derived Graphite Foam,” D. Gaies and K. T. Faber, Carbon, 40 [7] 1137-40 (2002).
“Thermoreversible Gelcasting: A Novel Ceramic Processing Technique,” J. K. Montgomery, P. L. Drzal, K. R. Shull and K. T. Faber, J. Am. Ceram. Soc., 85 [5] 1164-68 (2002).
“Effect of Heat Treatment on Phase-Stability, Microstructure, and Thermal Conductivity of Plasma-Sprayed YSZ,” R.W. Trice, Y. J. Su, J.R. Mawdsley, K.T. Faber, A. R. de Arellano-López, H. Wang and W. D. Porter, J. Mater. Sci., 37, 2359-65 (2002).
“In-Situ Characterization of Small-Particle Plasma-Sprayed Powders,” Y.J. Su, T. F. Bernecki and K. T. Faber, J. Thermal Spray Tech., 11, [1] 52-61 (2002).
“The Role of Starting Power Size on the Compressive Response of Stand-Alone Plasma- Sprayed Alumina Coatings,” R. W. Trice, C. Batson, C. Scharff and K. T. Faber, J. Mat. Sci., 37, 629-36 (2002).
“Fracture of a Textured Anisotropic Ceramic,” M. H. Zimmerman, D. M. Baskin, K. T. Faber, E. R. Fuller Jr., A. J. Allen and D. T. Keane, Acta Mater., 49, 3231-42 (2001).
“Textured Microstructures in Barium Hexaferrite by Magnetic Field Assisted Gelcasting and Templated Grain Growth, “ D. B. Hovis and K. T. Faber, Scripta Mater., 44, 2525-29 (2001).
”Microstructural Toughening of Ceramics, “K. T. Faber, pp. 1108-13 in Encyclopedia of Materials: Science and Technology, Volume 2, edited by K. H. Jürgern Buschow, et al. Elsevier Science Ltd, Oxford, 2001. invited publication
“Optimization of Small-Particle Plasma-Sprayed Alumina Coatings Using Designed Experiments, “ J. R. Mawdsley, Y. J. Su, K. T. Faber and T. F. Bernecki, Mat. Sci. Eng. A-Struct., 308, 189-99 (2001).
“Thermal Conductivity and Phase Evolution of Plasma-Sprayed Multilayer Coatings,” Y. J. Su, H. Wang, W. D. Porter, A. R. Arellano López and K. T. Faber, J. Mat. Sci., 36, 3511-18 (2001).
“Moiré Interferometry Analysis of Fiber Debonding,” T. C. Easley, S. P. Shah and K. T. Faber, J. Eng. Mech., 127 [6] 625-29 (2001).
“Evolution of Impedance Spectra During Debonding and Pullout of Single Steel Fibers from Cement,” J. M. Torrents, T. C. Easley, K. T. Faber, T. O. Mason and S. P. Shah, J. Am. Ceram. Soc., 84 [4] 740-46 (2001).
“Deformation Mechanisms in Compression-Loaded Stand-Alone Plasma-Sprayed Alumina Coatings,” R. W. Trice, D. W. Prine and K. T. Faber, J. Am. Ceram. Soc., 83 [12] 3057-64 (2000).
“Estudio Comparativo de Tecnicas de Preparacion de Muestras de Recubimientos Ceramicas Proyectados por Plasma para Microscopia Electronica de Transmision,” (Comparative Study of TEM Sample Preparation Techniques for Plasma-Sprayed Ceramic Coatings), A. Ramirez de Arellano Lopez, W. –A. Chiou, and K. T. Faber, Bol. Soc. Esp. Ceram. Vidrio, 39 [6] 735-40 (2000).
“Processing of Stepped-Density Alumina via Gelcasting and Reaction Bonding Techniques,” J. Montgomery and K. T. Faber, Scripta Mater., 42 283-287 (2000).
“The Dissociation of NZP (Ca0.5Sr0.5Zr4P6O24) During Plasma Spraying,” R. W. Trice, L. N. Brewer and K. T. Faber, Scripta Mater., 42 855-860 (2000).
“Effect of Microstructure on the High-Temperature Compressive Creep Behavior of Self-Reinforced Hot-Pressed Silicon Nitride,” M. A. Boling-Risser, K. C. Goretta, J. L. Routbort and K. T. Faber, J. Am. Ceram. Soc., 83 1 [12] 3065-69 (2000).
“The Role of Lamellae Morphology on the Microstructural Development and Mechanical Properties of Small-Particle Plasma-Sprayed Alumina,” R. W. Trice and K. T. Faber, J. Am. Ceram. Soc., 83 [4] 889-96 (2000).
“Fracture Behavior of Single Phase Fe2TiO5 Laminate Composites,” D. M. Baskin, K. T. Faber and E. R. Fuller, Jr., submitted to J. Am. Ceram. Soc., July 1999.
“Anisotropic Small-Angle Neutron Scattering Studies of Ceramics,” A. J. Allen, E. R. Fuller, K. T. Faber, M. H. Zimmerman and J. S. Wallace, pp.15-25 in Advanced Materials for the 21st Century: The 1999 Julia R. Weertman Symposium, edited by Y. –W. Chung, D. C. Dunand, P. K. Liaw and G. B. Olson, TMS, 1999.
“The Role of NZP Additions in Plasma-Sprayed YSZ: Microstructure, Thermal Conductivity and Phase Stability Effects,” R. W. Trice, Y. J. Su, K. T. Faber, H. Wang and W. Porter, Mat. Sci. Eng. A-Struct., 272 [2] 284-91 (1999).
“Use of Crack-Bridging Single Fiber Pullout Test to Study Steel Fiber/Cementitious Matrix Composites,” T.C. Easley, K.T. Faber and S.P. Shah, J. Am. Ceram. Soc., 82 [12] 3513-20 (1999).
“Microstructural Characterization of Small-Particle Plasma Spray Coatings,” A.R.de Arellano-López and K.T. Faber, J. Am. Ceram. Soc., 82 [8] 2204-2208 (1999).
“Effects of Loading Rate on the Fracture of Cementitious Materials,” S. Tandon and K.T. Faber, Cement and Concrete Research, 29 [3] 397-406 (1999).
“CERASET™ and BLACKGLAS™ Mini-Tow Composites with Carbon-Coated NICALON™ Tows,” S.T. Gonczy and K.T. Faber, pp. 149-60 in Ceramic Transactions Vol. 96. Edited by J. P. Singh and N. P. Bansal, American Ceramic Society, Columbus, OH. 1998.
“Morfología Granular Y Microestructura de Recumbrimientos Cerámicos de Grano Fino Proyectados Por Plasma (SPPS),” A. Ramírez de Arellano López y K.T. Faber, pp. 235-40 in Propiedades Mecanicas de Solidos ’98, Ed. By A. Pajares et al., 1998.
“Comparison of Focused Ion Beam and Conventional Techniques on TEM Specimen Preparation of Metal-Ceramic Interfaces,” A. Ramirez de Arellano López, W.-A. Chiou and K.T. Faber, Microsc. Microanal., 4 860-61 (1998).
“Strength and Stability Studies on Mini-Tow Ceramic Composites Made with Nitrided Nexel? 312 Fibers and Silicon Oxycarbide,” S.T. Gonczy, K. Oba and K.T. Faber, Ceram. Eng. Sci. Proc., 19 [3] 147-54 (1998).
“Effect of Interface Properties on Microcracking of Iron Titanate,” by A. Saigal, E.R. Fuller Jr., S.A. Langer, W.C. Carter, M.H. Zimmerman and K.T. Faber, Scripta Mater. 38 [9] 1449-1453 (1998).
“The Influence of Loading Rate on Crack Bridging Processes in Al2O3,” by S. Tandon and K.T. Faber, Acta Mater. 46 [10] 3547-55 (1998).
“Forming Tough, Single Phase Ceramic Laminates via Magnetic-Assisted Gelcasting,” D. M. Baskin and K. T. Faber, J. Japanese Inst. Metals, 61 [12] 1306-10 (1997).
“Forming Single Phase Laminates via the Gelcasting Technique,” D. M. Baskin, M. H. Zimmerman, E. R. Fuller, Jr., and K. T. Faber, J. Am. Ceram. Soc., 80 [11] 2929-32 (1997).
“Forming Textured Microstructures via the Gelcasting Technique,” M. H. Zimmerman, K. T. Faber, and E. R. Fuller, Jr., J. Am. Ceram. Soc., 80 [10] 2725-29 (1997).
“Tensile Tests of Miniature Fiber Reinforced Ceramic Composites for Screening Process-Property Relations,” S. T. Gonczy, R. C. Sprandel, K. T. Faber, Ceram. Eng. Sci. Proc., 18 [3] 729-36 (1997).
“Ceramic Composite Interfaces: Properties and Design,” K. T. Faber, Ann. Rev. Mater. Sci., 27, 499-524 (1997). invited publication
“High Temperature Stability and Thermal Expansion Behavior of Molybdenum/Chromium M2C Carbides,” C.A. Knepfler, K.T. Faber, J. Weertman, G.B. Olson, C.R. Hubbard, O.B. Cavin, N. Packen, J. Alloy Compounds, 248 [1-2] 139-42 (1997).
“Controlled Symmetry Breaking in Superconducting UPt3,” D.S. Jin, A. Husmann, T.F. Rosenbaum, T.E. Steyer, and K.T. Faber, Phys. Rev. Lett., 78 [9] 1775-78 (1997).
“Cyclic Fatigue of Reaction Bonded Silicon Nitride at Elevated Temperatures,” R.J. Christensen and K.T. Faber, J. Mater. Sci., 32 [4] 949-55 (1997).
"The Fracture Energy of Glass-Alumina Interfaces via the Bimaterial Bend Test," Anthony Cazzato and K.T. Faber, J. Am. Ceram. Soc., 80 [1] 181-88 (1997)
“Damage Tolerance of Silicon Carbide- and Alumina-Matrix Surface Composites,” P.S. Day, D.J. Skamser, K.T. Faber, H.M. Jennings, and D. Lynn Johnson, J. Am. Ceram. Soc. 79 [4] 1117-20 (1996).
“Texture Assessment of Magnetically Processed Iron Titanate, M.H. Zimmerman, K.T. Faber, E.R. Fuller, Jr., K.L. Kruger, and K.J. Bowman, J. Am. Ceram. Soc., 79 [5] 1389-93 (1996).
"On Loading Rate Effects in Toughening Processes," S. Tandon and K.T. Faber, Scripta Metall. Mater., 34 [5] 757-762 (1996)
"Residual Stress in Ceramics with Large Thermal Expansion Anistropy," S. W. Paulik and K. T. Faber, J. Mater. Res. 11 [11] 2795-2803 (1996)
"Room Temperature Cyclic Fatigue of Reaction Bonded Silicon Nitride Using the Double Cleavage Drilled Compression Specimen," Renee J. Christensen and K. T. Faber, J. Am. Ceram. Soc., 79 [2] 425-29 (1996).
"Fracture of Brittle and Quasi-Brittle Engineering Materials," S. Tandon and K. T. Faber, pp. 209-39 in Cements Research Progress 1993, [Leslie Struble], American Ceramics Society, Westerville, OH, 1995. invited publication
"Cohesive Crack Modeling of Influence of Sudden Changes in Loading Rate on Concrete Fracture," S. Tandon, K. T. Faber, Z. P. Bazant, and Y. N. Li, Engg. Fracture Mech., 52 [6] 987-997 (1995)
"Crack Stability in the Fracture of Cementitious Materials," S. Tandon, K.T. Faber, and Z. P. Bazant, MRS Sym. Proc., 370, 387-396 (1995).
"Fracture Strength of Free Standing CVD Diamond Films," T. E. Steyer, K. T. Faber, and M. D. Drory, Appl. Phys. Lett. 66 [23] 3105-07, (1995).
"Interfacial Debonding and Sliding in Brittle Matrix Composites Measured Using an Improved Fiber Pullout Technique," D. R. Mumm and K. T. Faber, Acta Metall. Mater., 43 [3] 1259-1270 (1995).
"Mechanical Behavior of Alumina Reinforced with Carbon Coated SiC Whiskers," Todd E. Steyer and K. T. Faber, J. Am. Ceram. Soc. 78 [10] 2673-79(1995).
"Tensile Behavior of Microcracking SiC TiB2," W. H. Gu and K. T. Faber, J. Am. Ceram. Soc., 78 [6] 1505-1512 (1995).
"Softening Reversal and Other Effects of a Change in Loading Rate on Fracture of Concrete," Zdenek P. Bazant, Wei Hwa Gu and K. T. Faber, ACI Mater. J., 92 [1] 3-9 (1995).
"Interface Design in Brittle Brittle Systems," K. T. Faber and Daniel R. Mumm, pp. 131-42 in High Performance Composites: Commonalty of Phenomena. Edited by K. K. Chawla, P. K. Liaw, and S. G. Fishman, TMS, Warrendale, PA, 1994. invited publication
"Effects of Reinforcement Surface Morphology on Toughening of Brittle Matrix Composites," Daniel R. Mumm and K. T. Faber, pp. 181-91 in High Performance Composites: Commonalty of Phenomena. Edited by K. K. Chawla, P. K. Liaw, and S. G. Fishman, TMS, Warrendale, PA, 1994.
"Development of Textured Microstructures in Ceramics with Large Thermal Expansion Anisotropy," S. W. Paulik, K. T. Faber, and E. R. Fuller, Jr., J. Am. Ceram. Soc. 77 [2] 454-58 (1994).
“Micro Mechanical Aspects of Fiber Debonding and Frictional Sliding in Brittle Matrix Composites,” D. R. Mumm and K. T. Faber, pp. 163 72 in Ceramic Transactions, Vol 38, Advances in Ceramic Matrix Composites. Edited by N. P. Bansal, American Ceramic Society, Columbus, OH, 1993.
"Multiple Cracking and Interface Debonding in a Brittle Film on a Ductile Rod," A. Cazzato and K. T. Faber, pp. 329 38 in Ceramic Transactions, Vol. 38, Advances in Ceramic Matrix Composites. Edited by N. P. Bansal, American Ceramic Society, Columbus, OH, 1993.
"DCB Methods for Examining Toughening in Alumina Reinforced with Carbon Coated SiC Whiskers," T. E. Steyer and K. T. Faber, pp. 617 30 in Ceramic Transactions, Vol 38, Advances in Ceramic Matrix Composites. Edited by N. P. Bansal, American Ceramic Society, Columbus, OH, 1993.
"X ray Residual Stress Analysis of a Ceramic Thermal Barrier Coating," David W. Jordan and K. T. Faber, Thin Solid Films 253, 137 41 (1993).
"Effective Dilatational Transformation Toughening in Brittle Materials," H. Cai and K. T. Faber, Scripta Metal. et Mater., 28 [9] 1161 66 (1993).
"High Temperature Hardness of Chemically Vapor Deposited Diamond," D. R. Mumm, K. T. Faber, M. D. Drory, and C. F. Gardinier, J. Am. Ceram. Soc., 76 [1] 238 40 (1993).
"Crack Bridging by Inclined Fibers/Whiskers in Ceramic Composites," H. Cai, K. T. Faber, and E. R. Fuller, Jr., J. Am. Ceram. Soc., 75 [11] 3111 17 (1992).
"Microcracking and R Curve Behavior in Microcracking SiC TiB2 Composites," W. H. Gu and K. T. Faber, R. Steinbrech, Acta Metall. et Mater., 40 [11] 3121 28 (1992).
"Fiber Debonding and Pullout Processes in Ceramic Composites," D. R. Mumm and K. T. Faber, Ceram. Eng. Sci. Proc. 13 [7 8] 70 77 (1992).
"Fracture Behavior of SiC Whisker Reinforced Al2O3 with Modified Interfaces," T. E. Steyer and K. T. Faber, Ceram. Eng. Sci. Proc. 13 [9 10] 669 677 (1992).
"Process Zone Formation in a Cement Aggregate Composites," D. Kilius and K. T. Faber, J. Mater. Sci. Lett. 11 [17] 1167 69 (1992).
"On the Use of Approximation Methods for Microcrack Shielding Problems," H. Cai and K. T. Faber, J. Appl. Mech. 59 [3] 497 501 (1992).
"Ferroelastic Toughening in Bismuth Vanadate," T. L. Baker, K. T. Faber, and D. W. Readey, J. Am. Ceram. Soc. 74 [7] 1619 23 (1991).
"Analysis of a Microcrack Prototype and Its Implications for Microcrack Toughening," H. Cai, B. Moran, and K. T. Faber, J. Am. Ceram. Soc. 74 [7] 1695 98 (1991).
"Fracture Properties on SiC Based Particulate Composites," K. T. Faber, W. H. Gu, H. Cai, R. A. Winholtz and D. J. Magley, pp. 3 17 in Proceedings of the NATO Advanced Research Workshop on Toughening Mechanisms in Quasi Brittle Materials. Ed. by S. Shah. Kluwer Academic Publishers, Dordrecht, 1991. invited publication
"Microcrack Toughening in a SiC TiB2 Composite," H. Cai, W. H. Gu and K. T. Faber, pp. 892 901 in Proceedings of the American Society for Composites 5th Technical Conference on Composite Materials, Technomic Publishing Co., Lancaster, PA, 1990. invited publication
“Residual Stresses in Microcracking Ceramics,” D. J. Magley, R. A. Winholtz and K. T. Faber, J. Am. Ceram. Soc., 73 [6] 1641 44 (1990).
"Segregant Enhanced Fracture in Magnesium Oxide," C. Conner and K. T. Faber, J. Mater. Sci., 25 [6] 2737 42 (1990).
"Interfacial Shear Stresses in Fiber Reinforced Glasses," R. W. Goettler and K. T. Faber, Comp. Sci. Tech., 37, 129 147 (1989).
"Dislocation Structures in In doped and Undoped GaAs Deformed at 700o 1100oC," R. S. Rai, S. Guruswamy, J. P. Hirth and K. T. Faber, Phil. Mag. A, 60 [3] 339 53 (1989).
"Influence of Solute Doping on the High Temperature Deformation Behavior of GaAs," S. Guruswamy, R. S. Rai, K. T. Faber, J. P. Hirth, J. E Clemans, S. McGuigan, R. N. Thomas, and W. Mitchel, J. Appl. Phys., 65 [6] 2508 12 (1989).
"Interfacial Shear Stresses in SiC and Al2O3 Fiber Reinforced Glasses," R. W. Goettler and K. T. Faber, Ceram. Eng. Sci. Proc., 9 [7 8] 861 70 (1988). non-refereed conference proceeding
"TEM Studies of Dislocations in Deformed Ga1-xInxAs Single Crystals," R. S. Rai, S. Guruswamy, K. T. Faber and J. P. Hirth, pp. 900 901 in Proceedings of the 48th Annual Meeting of the Electron Microscopy Society of America. Ed. by G. W. Bailey, Jr. San Francisco Press, San Francisco, CA, 1988. non-refereed conference proceeding
"Embrittlement in Ceramics," K. T. Faber and C. C. Hickenbottom, MRS Sym. Proc., 122, 475- 83 (1988). non-refereed conference proceeding
"Toughening by Stress Induced Microcracking in Two Phase Ceramics," K. T. Faber, T. Iwagoshi and A. Ghosh, J. Am. Ceram. Soc., 71 [9] C 399 C 401 (1988).
"Toughening in ZrO2 Based Materials," K. T. Faber, pp. 76 94 in Advanced Ceramics. Ed. by S. Saito. Ohmsha, Ltd./Oxford University Press, Oxford, 1988. invited publication
"Deformation Behavior of Undoped and In Doped GaAs in the Temperature Range 700oC to 1100oC,” S. Guruswamy, R. S. Rai, K. T. Faber and J. P. Hirth, J. Appl. Phys., 62 [10] 4130 34 (1987).
"Temperature Dependent Toughening in Whisker Reinforced Ceramics," M. C. Shaw and K. T. Faber, pp. 929 38 in Ceramic Microstructures '86: Role of Interfaces. Ed. by J. A. Pask and A. G. Evans. Plenum Press, New York, 1987. non-refereed conference proceeding
"Options for Low Thermal Expansion Coatings for Carbon/Carbon Composites," K. T. Faber and R. J. Kerans, Proc. 1987 Joint NASA/DoD Conference on Metal Matrix, Carbon, and Ceramic Matrix Composites, Metals and Ceramic Information Center, Columbus, OH, 1987. non-refereed conference proceeding
"Transmission Electron Microscopy Studies in Deformed Ga1-xInnAs," R. S. Rai, K. T. Faber, S. Guruswamy, and J. P. Hirth, p. 320 21 in Proc. 45th Ann Meeting EMSA, Ed. by G. W. Bailey, San Francisco Press, Inc., San Francisco, CA, 1987. non-refereed conference proceeding
“Fracture of Ceramics and Glasses,” D. R. Clarke and K. T. Faber, Phys. Chem. Sol., 47 [11] 1115 57 (1987). invited publication
“Computer Simulations of R Curve Behavior in Microcracking Materials,” G. D. Bowling, K. T. Faber and R. G. Hoagland, J. Am. Ceram. Soc., 70 (11) 849 54 (1987).
“High Temperature Hardness of Ga1-xInxAs,” S. Guruswamy, J. P. Hirth and K. T. Faber, J. Appl. Phys. 60 [12] 4136 40 (1986).
"Mechanical Properties of Ga1-xInxAs,” S. Guruswamy, J. P. Hirth and K. T. Faber, MRS Sym. Proc., 56, 329– 35 (1986). non-refereed conference proceeding
"Surface Energy as an Indicator of Interfacial Mechanical Response," H. T. Godard and K. T. Faber, pp. 687 96 in Tailoring Multiphase and Composite Ceramics, Proceedings of the 21st University Conference on Ceramic Science. Edited by R. E. Tressler, G. L. Messing, C. G. Pantano and R. E. Newnham. Plenum Press, New York, 1986. non-refereed conference proceeding
"Frictional Stress Evaluation Along the Fiber Matrix Interface in Ceramic Matrix Composites," K. T. Faber, S. H. Advani, J. K. Lee and J T. Jinn, J. Am. Ceram. Soc., 69 [9] C 208 09 (1986).
"Evaluating Reliability in Brittle Components by Thermal Stress Testing," D. Johnson Walls, M. D. Drory, A. G. Evans, D. B. Marshall and K. T. Faber, J. Am. Ceram. Soc., 68 [7] 363 67 (1985).
"Microcracking Contributions to the Toughness of ZrO2 Based Materials," K. T. Faber, pp. 293 305 in Advances in Ceramics, Volume 12. Edited by N. Claussen, M. Ruhle and A. H. Heuer. American Ceramic Society, Columbus, Ohio, 1984.
"The Crack Growth Resistance of Microcracking Brittle Materials," A. G. Evans and K. T. Faber, J. Am. Ceram. Soc., 67 [4] 255 60 (1984).
"Toughening of Ceramic Materials for Automotive Applications,” K. T. Faber, Ceram. Eng. Sci. Proc., 5 [5] 408 39 (1984). non-refereed conference proceeding
"Intergranular Crack Deflection Toughening in Silicon Carbide," K. T. Faber and A. G. Evans, J. Am. Ceram. Soc., 66 [6] C94 96 (1983).
"Crack Deflection Processes II. Experiment," K. T. Faber and A. G. Evans, Acta Metall., 31 [4] 577 84 (1983).
"Crack Deflection Processes I. Theory," K. T. Faber and A. G. Evans, Acta Metall., 31 [4] 565 76 (1983).
"Characterization of AlN Ceramics Containing Long Period Polytypes," G. Van Tendeloo, K. T. Faber and G. Thomas, J. Mater. Sci., 18 [2] 525 532 (1983).
"A Statistical Analysis of Crack Deflection as a Toughening Mechanism in Ceramic Materials," K. T. Faber, A. G. Evans and M. D. Drory, pp. 77 91 in Fracture Mechanics of Ceramics, Volume 6. Edited by R. C. Bradt, A. G. Evans, D. P. H. Hasselman and F. F. Lange. Plenum Publishing Company, New York, 1982. non-refereed conference proceeding
"Glass Microstructure Characterization by Laser Light Scattering, Small Angle X Ray Scattering and Electron Microscopy," G. E. Rindone, K. T. Faber, B. Kumar, W. F. Olix and J. F. Sproull, J. Non Cryst. Sol., 49, 253 62 (1982).
"Toughening of Ceramics by Circumferential Microcracks," A. G. Evans and K. T. Faber, J. Am. Ceram. Soc., 64 [7] 394 97 (1981).
"Quantitative Studies of Thermal Shock Based Upon a Novel Test Technique," K. T. Faber, M. D. Huang and A. G. Evans, J. Am. Ceram. Soc. 64 [5] 295 301 (1981).
"Small Angle X ray Scattering and Transmission Electron Microscopy of Water Containing Phase Separated Soda Lime Silica Glasses," K. T. Faber and G. E. Rindone, Phys. Chem. Glasses, 21 [5] 171 77 (1980).
"High Temperature Properties of SiC," J. A. Coppola, M. Srinivasan, K. T. Faber and R. H. Smoak, pp. 400 17 in Proc. Inter. Symposium on Sintering and Densification of Non Oxide Materials. Edited by S. Somiya and S. Saito. Association for Science Documents Information, Tokyo, Japan, 1979. non-refereed conference proceeding
"The Separation, Identification and Characterization of Radioactive Particles in Topsoil," K.T. Faber and R. L. Landingham, Powder Tech., 16 [2] 209 16 (1977).
Books and Book Chapters
The Mechanical Properties of Semiconductors, a volume of the treatise Semiconductors and Semimetals, K.T. Faber and K.J. Malloy, editors, Academic Press, San Diego, CA, 1992.
“Mechanical Properties of Elemental and Compound Semiconductors,” S. Guruswamy, K.T. Faber, and J.P. Hirth, pp. 189-230 in The Mechanical Properties of Semiconductors (Semiconductors and Semimetals). Edited by K.T. Faber and K.J. Malloy, Academic Press, San Diego, CA, 1992.